Browse all practice questions for the Aircraft Landing Gear Systems Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Aircraft Landing Gear Systems Practice Test course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • A shimmy damper is used to reduce the back and forth oscillations of the nose wheel at certain speeds.
  • The pressure should be checked ___ and before each flight.
  • What is a bogie in main landing gear?
  • What impact can ice buildup on hinges have on landing gear movement?
  • What is a common on-ground test for gear doors?
  • During landing gear maintenance, which action should be performed first to ensure safety?
  • Dye penetrant inspection is not a good method to locate cracks in the bead seat area.
  • In tailwheel configurations, instability on the ground is primarily due to the relationship between which two elements?
  • Which term describes the main load-bearing structure of the tire, made up of layers of rubber-coated nylon-cord fabric?
  • Which of the following is NOT listed as a method emergency gear extension systems may use?
  • During takeoff, the tailwheel is typically oriented in-line with the fuselage.
  • Power brakes are operated using pressure from the ______ hydraulic system.
  • How do hydraulic systems provide both primary and backup power to gear actuators?
  • If a jet aircraft uses Type 8 tires, what is the numerical designation?
  • Which inspection method should be used to detect cracks on the bead seat area?
  • Type ___ tires are used for high performance jet aircraft with their extremely high takeoff speeds.
  • Tires used on the nose wheels of these aircraft have ___, or deflectors molded into the upper sidewall to deflect the water or slush away from the engine intakes.
  • How does gravity extension operate in practice for gear?
  • All landing gear bolts must have the ______ to prevent wear and damage.
  • What is the function of wheel speed sensors in the landing gear/braking system?
  • Which storage orientation is recommended for tires whenever possible?
  • Even if only one of the plugs indicates any deformation, all of the plugs must be ______.
  • The procedure used to remove air from the brake system is known as
  • Which mode restriction helps prevent accidental gear retraction during flight?
  • What considerations arise when operating landing gear in icing conditions?
  • The pressure pot must be filled with the proper type of hydraulic fluid.
  • Tailwheel aircraft are highly susceptible to an abrupt, uncontrolled change in direction on the ground called what?
  • What troubleshooting steps are used for slow gear extension?
  • What does the yellow mark on an aircraft tube indicate?
  • How are gear-linked position sensors used to indicate down-and-locked status?
  • Water stains on a wheel bearing indicate which type of corrosion?
  • If the tops of the wheels are closer together than the bottoms, the landing gear has a ______ camber.
  • What is the purpose of a weight-on-wheels (WOW) sensor?
  • If the front sides of the wheels are closer together than the rear sides, the landing gear is ______.
  • Which protective equipment must be worn during landing gear maintenance to protect personnel?
  • If a jet aircraft uses Type 7 tires, what is the numerical designation?
  • How is hydraulic pressure managed across multiple actuators to ensure reliable gear operation?
  • How does the oleo strut absorb touchdown energy?
  • A ______ ______ valve is designed to prevent a complete loss of hydraulic system fluid if a brake line fails or leaks.
  • If the front sides of the wheels are closer together than the rear sides, the landing gear is ______.
  • Which of the following is NOT typically considered a major component of a tricycle landing gear?
  • How is a successful 'down and locked' status typically verified in the cockpit?
  • What is the primary function of the oleo strut in airplane landing gear?
  • Tubeless tires are identified by the word ___ on their sidewall.
  • Which energy form do shock absorbers typically dissipate?
  • Which inspection method should be used to detect cracks on the bead seat area?
  • What does the green 'down and locked' indication signify to the flight crew?
  • Skydrol is a common example of which type of hydraulic fluid?
  • In case of total failure of the hydraulic system, most large aircraft brake systems can be operated using a ______ emergency system.
  • The inboard wheel half is the half of a ______ wheel that houses the brake.
  • Why is a preflight gear inspection important?
  • Which action directly supports the aircraft to prevent movement during maintenance?
  • What term describes the condition when the wheel tops are closer together than the bottoms?
  • In the event of hydraulic failure, brakes can be operated using which emergency system?
  • Which combination lists three major components typically found in a tricycle landing gear arrangement?
  • The ___ is the wearing surface on the outer circumference of the tire.
  • Fluid from the wheel unit is vented to the atmosphere through which compensator component?
  • The greatest heat will be generated in a tire that is operated ________.
  • The Cleveland brake for general-aviation aircraft uses which component bolted to the inside wheel half?
  • Describe a typical gear extension sequence in terms of door and gear movement.
  • Which statement best describes the relationship between tire wear and braking performance?
  • If any fusible plugs show signs of softening, they must all be replaced.
  • The tailwheel landing gear arrangement is also known as which of the following?
  • Which procedure ensures energy isolation of hydraulic systems during landing gear maintenance?
  • Is there a limit on the number of times an aircraft tire can be retreaded?
  • Which items are commonly inspected during routine landing gear door maintenance?
  • Which condition contributes to spongy braking actions due to deterioration of hoses?
  • A ______ system is used to inform the pilots if the gear is not down during a landing attempt.
  • Gear warning systems are designed to warn the pilot that the gear is not down and locked when the aircraft is in the ______ configuration.
  • The wheel is locked in-line with fuselage for takeoff and unlocked for landing allowing it to swivel ______ for ______.
  • What is the role of a preflight weight-on-wheels check?
  • The ___ of the tire is made up of layers of plies of rubber-coated nylon-cord fabric.
  • If a brake fails to completely release after the pressure is removed, it is said to be ______.
  • Tires that have been operated with ___ inflation pressure will have their tread worn away on the shoulders more than in the center.
  • To safely ensure complete tire deflation, which component is first screwed onto the valve?
  • Before working on landing gear, which procedure isolates energy sources and prevents unexpected re-energization?
  • The hydraulic pressure to the brake system is reduced using a ______ system.
  • Which inspections should be used to detect cracks on the bead seat area?
  • Which components are responsible for sequencing during gear extension and retraction?
  • The streamlined fairings used to enclose the wheels are referred to as what?
  • During a preflight check, which outcome verifies that the landing gear will function properly in flight?
  • What ground action verifies proper sealing of gear doors after maintenance?
  • Why must gear retraction be limited by a torque or speed limit?
  • Which items are typically included in common maintenance checks for landing gear doors?
  • What is the most important part of a tire?
  • When drying bearings with low-pressure dry compressed air, DO NOT ______ the bearings as you dry them.
  • The wheel fairings used to enclose the wheels are called what?
  • A ______ ______ is used to reduce the back and forth oscillations of the nose wheel at certain speeds.
  • What is typical about the nose wheel steering angle?
  • An oleo strut absorbs the landing impact shock with what?
  • What role do tires play in braking and heat dissipation?
  • Which gear arrangement is considered conventional?
  • What term describes the condition when the front sides of the wheels are closer together than the rear sides?
  • If the tops of the wheels are closer together than the bottoms, the landing gear has a ______ camber.
  • What visual cue in the cockpit confirms the landing gear is down and locked?
  • Dye penetrant inspection ______ a good method to locate cracks in the bead seat area of an aircraft wheel.
  • Screwdrivers or tire tools should not be used to pry a tire bead away from the rim.
  • What signals the cockpit that the gear is down and locked?
  • What component prevents a complete loss of hydraulic system fluid if a brake line fails or leaks?
  • In the wheel brake hydraulic system, which component is vented to the atmosphere?
  • How can you recognize an uncommanded gear extension in flight?
  • Hydroplanning is defined as the tire losing contact with the surface due to standing water. Which statement best describes this condition?
  • During landing, the gear must be in which condition?
  • In a maintenance scenario, what is the purpose of testing the emergency extension path?
  • The most popular low-pressure tire found on piston-powered aircraft today is the Type ______ tire.
  • What would you check if a gear actuator appears slow to move during flight?
  • How is nose wheel steering typically actuated and controlled?
  • The ___ is the most popular tread pattern found on aircraft today.
  • Before loosening the wheel half retaining bolts, be sure the tire is completely ______.
  • An oleo strut absorbs the taxi shocks with which medium?
  • These centering cams center the nose wheel when the strut is extended after ______.
  • What is a kneeling gear feature and where is it used?
  • The inboard wheel half is the half of a ______ wheel that houses the brake.
  • Anytime a brake shows signs of ______, it must be removed from the aircraft, inspected, and rebuilt.
  • If the gear is not down, a ______ horn will sound until the throttles are opened or the gear is lowered.
  • Which system provides a warning to pilots if the landing gear is not down?
  • The most widely used shock absorber for aircraft is the air-oil shock absorber, commonly known as what?
  • Which area of a wheel is most critical to tire bead retention?
  • What is the role of an anti-skid braking system (ASBS) in relation to landing gear?
  • How would you verify the emergency extension handle is functional?
  • What is the function of a relief valve in a hydraulic gear circuit?
  • _______ brakes are used in the wheels of large jet-transport aircraft.
  • Which component on a landing gear serves the damping function due to constant hydraulic pressure?
  • Aircraft bearings should not be cleaned with steam.
  • Which device is installed in the inboard half of the main wheels to release air from a tire in case of extreme overheating?
  • Which safety measure ensures that energy cannot be accidentally released from hydraulic systems during maintenance?
  • During flight, and during gear extension, what is the primary purpose of landing gear doors?
  • Which condition contributes to spongy braking actions due to trapped air in the system?
  • What is the typical behavior of the nose wheel steering after a steering input is released?
  • Which statement describes tubeless tires?
  • Before loosening the wheel half retaining bolts, it is essential to confirm that the tire is completely ______.
  • Which step should be performed to ensure hydraulic leaks do not create hazards during maintenance?
  • Which items are considered non-absorbing gear?
  • How do crossfeed lines support gear operation in a dual-hydraulic system?
  • What could cause an anti-skid sensor failure and how would it affect braking?
  • Which feature on the nose-wheel tire deflects water or slush away from engine intakes?
  • In the brake system, which component keeps the compensator port open when the pedal is not depressed?
  • The tailwheel type landing gear arrangement is also known as what?
  • The fluid in an oleo strut that provides the absorbing effect during landing is what?
  • Which brake is typically used on most small general-aviation aircraft?
  • Which device prevents gear retraction on the ground?
  • What is the purpose of a landing gear warning system?
  • What is a common indication of a gear extension fault?
  • Which area is described as the most critical part of a wheel?
  • Why is it generally recommended to avoid retracting gear at high speed?
  • If a brake system is inadvertently serviced with the wrong type of hydraulic fluid what must be accomplished?
  • Why are redundant gear actuators used on large airplanes?
  • The medium that cushions the oleo strut during taxi operations is what?
  • Which action provides physical support to the landing gear during maintenance to prevent collapse or rotation?
  • The operation performed to remove air from the brake system is known as ______ the brakes.
  • Which components are involved in a typical gear retraction/extension system?
  • _______ is the controlled movement of the airplane under its own power, while in the ground.
  • Which color light is commonly used to indicate gear down?
  • What is a typical nose gear shimmy damper issue?
  • How might you diagnose a slow-acting gear actuator in flight?
  • Why is proper tire inflation critical for landing gear performance?
  • How would you test the wheel speed sensors during maintenance?
  • What is the role of limit switches in a gear retraction/extension system?
  • While taxiing an airplane, if there is any doubt about clearance from an obstacle,_______ the airplane and_______.
  • Which diagnostic steps are appropriate when a door misalignment is suspected?
  • The code 'green, locked' indicates which gear status?
  • What is the role of interlocks and limit switches in gear doors operation?
  • Define the term 'downlock' in landing gear systems.
  • What term describes braking that prevents a skid by maintaining just enough brake pressure?
  • In many cases, the steering actuators serve as the ______ because they are constantly charged with hydraulic fluid under pressure.
  • If ANY fusible plugs show signs of softening, they must all be replaced.
  • The hydraulic system may use either a phosphate-ester-base synthetic fluid such as Skydrol, or mineral-base MIL-H-5606 fluid. Which two factors must be noted and followed?
  • _______ occurs when the aircraft's tires lose contact with the taxiway or runway surface, generally because of standing water on the surface.
  • What indicates a failure of the gear-down sensing system?
  • All retractable landing gear systems must have some means of ______ the gear if the primary method fails.
  • Which toe setting describes the configuration where the front wheel edges are closer than the rear?
  • There_______ a limit on the number of times an aircraft tire can be retreaded.
  • Why is hydraulic redundancy critical for landing gear operations?
  • Tires should be stored_______ whenever possible.
  • Which device prevents gear retraction when the aircraft is on the ground?
  • Which safety measure helps prevent the aircraft from moving during landing gear maintenance?
  • Which procedure provides a formal, verifiable means of controlling hazardous energy during maintenance on landing gear?
  • What role does valve timing play in coordinating multiple main gear actuators?
  • Which component is the wearing surface on the outer circumference of the tire?
  • What is a shimmy damper and where is it used?
  • What is the consequence of a defective wheel speed sensor on braking control?
  • Shock absorbing gear converts motion into energy, usually in the form of heat.
  • How do gear doors ensure safe movement during extension and retraction?
  • Which action is taken to physically stabilize the aircraft during landing gear service to maintain a safe work plane?
  • What does the red dot on an aircraft tire indicate?
  • What procedure provides a documented means of ensuring equipment cannot start up during maintenance?
  • In landing gear operation, how does ground mode differ from flight mode?
  • Which component reduces nose wheel shimmy at certain speeds?
  • Which condition is most likely to result in tire damage or failure?
  • How are main gear actuators synchronized to ensure equal extension?
  • Which action helps maintain stability of the aircraft when extending or retracting landing gear for inspection?
  • How would you diagnose a gear that seems stuck due to door misalignment?
  • Inflation of an oleo strut is checked by measuring the length of the exposed what?
  • Which system uses the WOW sensor to enable ground spoilers and braking logic?
  • Which measure directly reduces the risk of aircraft movement during landing gear service?
  • The component described as the air-oil shock absorber is commonly known as what?
  • Oleo strut inflation is checked by measuring the length of the exposed what?
  • Where are fusible plugs installed on the wheel?
  • Dye penetrant inspection is a good method to locate cracks in the bead seat area of an aircraft wheel.
  • The spring in a tailwheel-type landing gear provides steering ______.
  • Which of the following is a typical indicator of a damaged gear door seal?
  • Which safety measure is essential for personal protection when performing landing gear maintenance?
  • What is the purpose of an emergency extension procedure?
  • Water stains on a wheel bearing indicate which type of corrosion?
  • What is the role of a gear door interlock?
  • MIL-H-5606 refers to which type of hydraulic fluid commonly used in aircraft, sometimes called 'red oil'?
  • What is the role of valve logic in a multi-actuator gear system?
  • Most small general-aviation aircraft are equipped with_______ brakes.
  • ______ brake action is nearly always an indication of air in the brake hydraulics system.
  • In a dual-hydraulic landing gear system, what happens if one hydraulic path becomes unavailable?
  • The red dot on an aircraft tire generally indicates the_______ spot.
  • The ______ ______ arrangement is seldom used on civilian aircraft other than gliders.
  • All retractable landing gear systems must have some means of ______ the gear if the primary method fails.
  • Retractable gear aircraft generally use a light to indicate that the gear is down and locked. What color is this light?
  • A squat switch may be installed in a landing gear retraction system to prevent the landing gear from being raised while the aircraft is on the ground.
  • What is the consequence of not maintaining proper torque on landing gear bolts?
  • Differentiate gravity extension from emergency hydraulic extension.
  • What is the purpose of a squat switch in a landing gear retraction system?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy